Henderson

OSP42A

  • Optimum insulation thanks to the 42 mm-thick panels
  • 11 standard colours in surface finish
  • Optional windows
  • Pass-door option with normal or low threshold
  • Electrical or manual operation
  • Various rail runner configurations
  • Safety features such as spring fracture protection and, where necessary, cable break protection (optional)
  • SKG-certified burglary protection based on Dutch standard NEN 5096 (optional)
Henderson OSP42A

Colours

Standard exterior colours based on the following colour overview with surface finish.
Painted doors are also available in all RAL and NCS colours.

Standard colours in surface finish

Rape yellow (similar to RAL 1021) Rape yellow (similar to RAL 1021)
Carmine red (similar to RAL 3002) Carmine red (similar to RAL 3002)
Gentian blue (similar to RAL 5010) Gentian blue (similar to RAL 5010)
Moss green (similar to RAL 6005) Moss green (similar to RAL 6005)
Anthracite grey (similar to RAL 7016) Anthracite grey (similar to RAL 7016)
Grey-white (similar to RAL 9002) Grey-white (similar to RAL 9002)
White aluminium (similar to RAL 9006) White aluminium (similar to RAL 9006)
Grey aluminium (similar to RAL 9007) Grey aluminium (similar to RAL 9007)
Traffic white, (similar to RAL 9016) Traffic white, (similar to RAL 9016)
Chocolate brown (similar to RAL 8017) Chocolate brown (similar to RAL 8017)
Deep black (similar to RAL 9005) Deep black (similar to RAL 9005)

Finish

Micro finish Micro finish

The micro finish of the panels is not just elegant, it also provides exceptional stability, even for wide doors.

Window and frame section

The Henderson OSP42A Industrial Sectional Door can be fitted with one or more Henderson OSF42A frame sections.

DARP glazing DARP glazing

DAOP glazing DAOP glazing

Light bands

Frame section Frame section

Pass-doors

Pass-doors

Pass-door industrial door Pass-door industrial door

 

The pass-door with low threshold was developed in order to enable convenient crossing and minimise the risk of tripping.

The pass-door has a standard width of 900 mm and offers extra space.

 

Low_treshold_IDD 

Operating and control systems

 

Normstahl_ID07

t-hoist_2

Automatic operation

Powerful electric motors provide maximum convenience. Available as an operator unit with 230 V motors, virtually maintenance-free gear and quick release for manual operation. It is possible to move the operator with an axle chain drive if little space is available at the side.

The Henderson IDO7 operator is a combination of the Henderson IDO7 mechanical unit and a door controller from the Henderson C700 series.
The system is available in 3 versions, for doors weighing up to 400 kg and for doors weighing over 400 kg and as a high-speed version for doors up to 250kg.

Thanks to a built-in frequency converter, the ID07 drive unit features a soft-start and soft-stopp as standard. The gentle acceleration and deceleration at the end positions reduces the erosion and the noise level of the door.


 

Manual operation

Henderson Industrial Sectional Doors can be operated manually using a rope pull. The rope pull is connected directly to the door curtain.

A hand chain makes it easier to operate heavy doors. The gear wheel chain drive (transmission ratio 1:4), which is connected directly to the shaft, is set to 1" shafts. Suitable for doors with a max. door weight of up to 250 kg.
 

Normstahl_ID07_Nothandkettenzug

Integrated chain hoist

Another great feature of the IDO7 is the possibility of an integrated chain hoist (ratio 1:3,5) for fast emergency opening/closing in case of power failure.


 

normstahl_C700

Convenient control

The Henderson C700 door controller offers a range of control options, from simple push-button operations to opening and closing the door through to sophisticated technical automatic functions.

The controller design is based on modules. Security upgrades and other automatic functions are available. Additional functions, such as magnetic loops, photocells, radar, radio control and restricted door opening are easy to add.

The function of limited door opening is possible by simply pushing a button printing (as standard)